LANGUAGE ADD/LANGUAGE SELECT

Qualifiers:

LANGUAGE ADD <BR_PORTUGUESE> SETS AUX1 FROM *LANGSEL

LANGUAGE ADD <BR_PORTUGUESE> SETS AUX2 FROM *LANGSEL

LANGUAGE ADD <BR_PORTUGUESE> SETS DEFAULT FROM *LANGSEL

LANGUAGE DISPLAY

LANGUAGE SELECT <BR_PORTUGUESE> SETS AUX1 FROM *LANGSEL

LANGUAGE SELECT <BR_PORTUGUESE> SETS AUX2 FROM *LANGSEL

LANGUAGE SELECT <BR_PORTUGUESE> SETS DEFAULT FROM *LANGSEL

NOTES

After you issue the Language Select command, perform an SDS Synchronization of the Device Level Resiliency forms to propagate the changes throughout the network or cluster and then reset the system.
You must set DEFAULT, AUX1, and AUX2 to different languages. If you set any of these language components (DEFAULT, AUX1, or AUX2) to the same language, then the set displays may exhibit unpredictable behavior. For example, prompts may be missing from the Superkey menu.

Purpose:

Changes the current language of the set displays.

NOTES

Database Restore operations will preserve the set language active on individual sets at the time of a Database Backup. Preservation applies only to databases originating from and restored to 3300 ICP Release 9.0 or later systems.
This command is not applicable to Symbol wireless phones as they only support English.
Factory settings for languages are determined by the country/region selected in the License and Options Selection form.
This command is not applicable to the MiVoice Business Console.

Details:

While the LANGUAGE SELECT command is executing (which may take up to five minutes), no other command will be recognized.

When the LANGUAGE SELECT command is entered with a SETS qualifier, calls in progress on these sets will be lost.

NOTE: When using the LANGUAGE ADD command, changes are applied the next time the system is reset.

The following languages can be specified:

English
German
Dutch
French
Italian
LA_Spanish (Latin America)
EU_Spanish (Europe)
BR_Portuguese (Brazil)
PT_Portuguese (Europe)
Romanian
Russian (5540 IP Console, 5212, 5215 Dual Mode, 5220 Dual Mode, 5224 IP Phones, and 69xx IP Phones)
Swedish (5540 IP Console, 5212, 5215 Dual Mode, 5220 Dual Mode, 5224 IP Phones, and 69xx IP Phones)
Polish (5540 IP Console, 5212, 5215 Dual Mode, 5220 Dual Mode, 5224 IP Phones, and 69xx IP Phones)
Simplified Chinese (5312, 5324, 5330/5330e, 5340/5340e, 5360 IP Phones)
Arabic (5312 and 5324 IP Phones only but Local 1/Local 2 Language installation required - contact your local Mitel representative for assistance)

Local 1 and Local 2 languages are in English by default and can be modified by Mitel-authorized personnel to display languages other than those listed above. For more information, see Mitel Knowledge Base article 08-3070-00005.

NOTE: If you use the LANGUAGE ADD or LANGUAGE SELECT command to change the language on a phone to a language that the phone doesn't support, the phone's softkeys and display messages appear in English.

Language Add/Language Select Command Effects
Component	Effect
SETS DEFAULT	Changes the default language for Mitel display telephones and attendant consoles. The status of the auxiliary languages is not changed.
SETS AUX1	Changes the first auxiliary set language for Mitel Networks display telephones and attendant consoles.
SETS AUX2	Changes the second auxiliary set language for Mitel display telephones and attendant consoles.

NOTE: Any change (DEFAULT, AUX1, or AUX2) applies to all sets running the current (to be replaced) language; for example, if you change English to French (DEFAULT, AUX1, or AUX2), all sets currently using English will be converted to French.

Example scenario:

If the current DEFAULT / AUX1 / AUX2 setting is: English / French / Spanish, and you wish to convert all sets from English to French, perform the following steps:

Change AUX1 from French to English.

New setting: English / English / Spanish

NOTE: All sets previously set to French change to English. This is a transitory setting since each component must be set to a different language.

Change DEFAULT from English to French.
All sets previously set to English change to French; any new sets will be set to French by default.

New setting: French / English / Spanish

Command Examples:

Entry: LANGUAGE SELECT FRENCH SETS DEFAULT

System Response:

Loading FRENCH language, please wait . . .
Language selection is complete.

Entry: LANGUAGE SELECT ITALIAN SETS AUX1

System Response:

Loading ITALIAN language, please wait . . .
Language selection is complete.

Entry: LANGUAGE SELECT RUSSIAN SETS AUX1

System Response:

Loading Russian language, please wait . . .
Warning: Sets incapable of displaying Russian will display English instead.
Language selection is complete.